IntruGuard Products
Products Overview
Key Capabilities
Benefits
Technical Specs
Product Datasheets
 

Technical Specs

General
  IG200 IG2000
Aggregate throughput 10/100/1000 Mbps full duplex depending on the sub-model 10/100/1000 Mbps full duplex
Forensic 10/100 Mbps (2 ports) 10/100/1000 Mbps (2 ports)
Management 10/100 Mbps 10/100 Mbps
Dimensions

Rack-mountable 2U chassis,
3.40" (86.60mm) H
17.41” (44.221cm) W
20.10” (51.054cm) D

Weight: 27 lbs (12.25 kg) max

Rack-mountable 2U chassis,

3.40" (86.60mm) H
15.98" (431.40mm) W
17.41" (442.38mm) D

Weight: 33 lbs (15 kg) max

Hard disks Single hard disk Redundant hard disk configuration - RAID-1
Power Supply Single power supply Redundant power supply
Field Upgradability Can be upgraded in field through a license file to support 2000 Mbps (1000 Mbps Full Duplex) and up to 8 Virtual Identifiers (VIDs). Can be upgraded in field through a license file to support up to 8 Virtual Identifiers (VIDs).

Visibility, ACLs, Bandwidth Control

Protocols, Fragment, Source, Destination, TCP Ports, UDP Ports, ICMP Types/Codes, SYN, Connection Establishment Rate, HTTP URLs, HTTP Opcodes, User-agent, Cookie, Referer, Host.

Country Code/IP Address Filters

IntruGuard IG200/2000 features a unique filtering capability through its hardware logic. This logic enables a network administrator to block entire countries in a few clicks. Just click on a country using the GUI or CLI to either accept or block them in your appliance for both inbound as well as outbound traffic. You can select countries from a list.

Traffic and Event Analysis

Granular graphs and reports for traffic for past hour, day, week, month, and year

Top attacks; top attackers; top sources; top connections; top destinations; top scanners; top attacked services

Reconnaissance and anomaly Prevention

dark address scan, IP header checksum; land attack, loopback; address spoofing, non-IPV4/V6, TCP, UDP, ICMP header checksum, illegal TCP flag combinations, illegal TCP state transitions, TCP sequence number violations, foreign TCP packets.

Allows encrypted traffic, identifies invalid traffic without the need to decrypt data.

Performance Metrics

Simultaneous connections: 1,000,000

Latency: under 50 microseconds

Attack mitigation response time: under 2 seconds

Device Management

Web-based: SSL

SNMP: V1, V2c, V3 traps

Notification: email, pager

Environmental

Operating temperature: 0°C to 40°C

Humidity: 5%-95% non-condensing

General

Network Interfaces: Two 10/100/1000 Base-T data ports, two 10/100/1000 Base-T forensic ports; one 10/100 Base-T management port, optional Fiber intefaces

Power: 110 VAC to 220 VAC, 250 Watts

Fail-over Support: Extrinsic and intrinsic

Test Results (For third party tests from Tolly Group: Click here)

Tests performed on IG200-U platform on June 29, 2010

Latency Test

Packet Loss Test

Throughput Test

Back to Back Packets Test